Soft Rock Crushing Double Roller Crusher Discharge Size Less Than
30-60 Mm
Product Introduction
Double Roller Crusher adopts the principle of instant crushing, and
the materials are squeezed and rubbed against each other, so the
production capacity is high and the shape of the discharged
particles is good. For raw materials below medium hardness (such as
limestone, the molar hardness is 3), the proportion of small
materials in the feeding process is controlled, and Double Roller
Crusher is used for both coarse crushing and intermediate crushing,
which can greatly increase the output, at least up to 60 %.
Taking the required finished material specification as an example
of 40mm-80mm, the first-stage crushing feed particle size is
controlled within 600mm, the discharge port is set to 200mm, and
the discharge particle size is controlled within 210mm. Entering
the secondary crushing, the finished material of 40mm-80mm can
reach at least 60%.
Technical Reference Data
| Model | Diameter of roller (mm) | Length of roller (mm) | Maximum side length of feeding material (mm) | Grain size of discharging material(mm) | Production capacity (t/h) | Power (kw) | Soft connection weight (t) | Direct connection weight (t) |
| XCMD500 | 500 | 1000 | ≤100 | ≤30-60 | 50-120 | 37*2 | 9.5 | 8.2 |
| 1500 | 100-180 | 45*2 | 11.8 | 10.5 |
| 2000 | 150-220 | 90*2 | 14.5 | 12.8 |
| 2500 | 200-300 | 110*2 | 18 | 16.3 |
| XCMD650 | 650 | 1000 | ≤120 | ≤30-60 | 50-130 | 45*2 | 12.3 | 10.5 |
| 1500 | 100-255 | 55*2 | 18.5 | 16 |
| 2000 | 200-350 | 75*2 | 23 | 21 |
| 2500 | 350-450 | 90*2 | 28 | 25 |
| XCMD750 | 750 | 1000 | ≤140 | ≤40-70 | 150-250 | 55*2 | 23 | 21 |
| 1500 | 200-350 | 75*2 | 26.5 | 24.5 |
| 2000 | 250-450 | 90*2 | 30 | 27.2 |
| 2500 | 350-550 | 110*2 | 33.8 | 30.8 |
| XCMD850 | 850 | 1000 | ≤160 | ≤40-70 | 150-300 | 75*2 | 26 | 23.5 |
| 1500 | 200-400 | 90*2 | 31.5 | 28.5 |
| 2000 | 300-500 | 110*2 | 36 | 33 |
| 2500 | 350-650 | 132*2 | 39 | 36 |
| XCMD1000 | 1000 | 1000 | ≤220 | ≤40-80 | 250-450 | 90*2 | 46.8 | 41 |
| 1500 | 350-550 | 110*2 | 52 | 46.2 |
| 2000 | 500-700 | 132*2 | 58 | 52.5 |
| 2500 | 650-800 | 160*2 | 65 | 60 |
| XCMD1200 | 1200 | 1500 | ≤250 | ≤40-90 | 650-900 | 160*2 | 81 | 73 |
| 2000 | 750-1100 | 185*2 | 93 | 85 |
| 2500 | 900-1500 | 220*2 | 106 | 98 |
Based on the given specifications, the roller crusher has the
following characteristics:
Length of roller: 1000 mm - This refers to the length of the
cylindrical roller used for crushing the material. It determines
the contact area between the roller and the material being crushed.
Diameter of roller: 650 mm - This specifies the diameter of the
cylindrical roller. The larger the diameter, the greater the
crushing force exerted on the material.
Feed size: Less than 120 mm - The roller crusher is designed to
handle materials with a maximum feed size of 120 mm. Any material
larger than this size needs to be reduced before being fed into the
crusher.
Discharge size: Less than 30-60 mm - The roller crusher is capable
of producing a discharge size of less than 30-60 mm. This indicates
the maximum size of the crushed material after passing through the
crusher.
Output capacity: 50-130 TPH - The roller crusher is capable of
processing and producing an output of 50 to 130 tonnes per hour.
This range represents the maximum capacity of the crusher in terms
of the amount of material it can handle within a specified time
frame.
Weight: 12.3 t - The weight of the roller crusher is 12.3 tonnes.
This weight is an important consideration for installation,
transportation, and overall stability of the machine.
Overall, the roller crusher is designed to efficiently crush
materials with a feed size of less than 120 mm into a discharge
size of less than 30-60 mm. It has a high output capacity ranging
from 50 to 130 tonnes per hour, making it suitable for medium to
large-scale crushing operations.
Our Service
